Legacy Upgrade

This section contains instructions for clients upgrading from versions 7.22.15 and earlier. Follow the instructions in this section, then return to the main upgrade section to complete the procedure.

Update configuration files

Apply the changes to the web configuration file based on the version from which you're upgrading. Once you've applied these changes, return to the Update configuration files section in the main upgrade section and continue with the changes there.

📌 Examples

When upgrading from version 6.5.0, apply the changes in the When upgrading from version 6.5.0 section to the When upgrading from all 7.x.x versions and earlier section.
When upgrading from version 7.22.1, apply the changes in the When upgrading from all 7.x.x versions and earlier section only.

When upgrading from version 5.7.4 and earlier

Check the following parameters in your \wfgen\web.config and add them if they aren't already there.

<add key="EngineEnableSelfServiceDataAssignException" value="N" />
<add key="EngineNotificationDefaultReplyTo" value="" />
<add key="EngineNotificationMaxFileAttSize" value="10" />
<add key="EngineNotificationTextDetection" value="Y" />
<add key="EngineNotificationServerTimeout" value="3" />
<add key="ApplicationDistributedDatabaseSourceMode" value="0" />
<add key="ApplicationEnableDistributedDatabaseSource" value="N" />
<add key="ApplicationEnableArchiveSiteRedirectConfirmation" value="Y" />
<add key="ApplicationArchiveSiteUrl" value="" />
<add key="ApplicationShowAssociatedDataWithEmptyValue" value="Y" />
<add key="ApplicationSecurityEnableWebAppsSecureMode" value="N" />

WorkflowGen.My and WorkflowGen.My.Web.UI.WebControls (WorkflowFileUpload) version 3.0 or later are required in all your Visual Studio Web Forms if the ApplicationSecurityEnableWebAppsSecureMode security feature is enabled. For more information, see the Web apps security: Workflow parameters secure mode WorkflowGen Knowledge Base article.

<add key="PortalEnableComments" value="Y" />
<add key="PortalCommentsRefreshFrequency" value="30000" />
<add key="PortalCommentsPopUpWidth" value="376" />
<add key="PortalCommentsPopUpHeight" value="545" />
<add key="PortalCommentsSortBy" value="DATE_POST" />
<add key="PortalCommentsSortOrder" value="ASC" />
<add key="PortalCommentsExpandView" value="N" />
<add key="PortalCommentsListSize" value="25" />
<add key="PortalDisplayCodeNames" value="N" />
<add key="PortalMaxListSize" value="1000" />
<add key="PortalQuickViewEnabled" value="Y" />
<add key="PortalQuickViewDataName" value="FORM_ARCHIVE" />
<add key="PortalQuickViewDisplayOnMouseEvent" value="CLICK" />
<add key="PortalTextDetection" value="Y" />
<add key="PortalActivityCompleteInBackground" value="N" />
<add key="PortalEnableSearchResultAutoRedirect" value="Y" />
<add key="PortalCommonProcessDataNameList" value="" />
<add key="PortalReportEnableCustomColumns" value="Y" />
<add key="PortalReportAllowUserToCreateCustomColumns" value="Y" />
<add key="ReportsTextDetection" value="Y" />
<add key="AdministrationFormDataProviderName" value="System.Data.SqlClient, System.Data.OleDb, System.Data.Odbc, System.Data.OracleClient" />
<add key="AdministrationEnableDeletionRulesCheck" value="Y" />
<add key="AdministrationRestrictManagerToModifyGlobalParticipant" value="N" />
<add key="AdministrationFormDesignUndoLimit" value="30" />
<add key="DirectorySynchronizationMaxUserDeletionCount" value="0" />
<add key="DirectorySynchronizationSyncGroupMembersUsedInParticipantOnly" value="N" />
<add key="PortalFrameSetHeight" value="0,68,*,0" />

The first number in the PortalFrameSetHeight value is the height of the banner. If your website is configured to display a banner, enter its height in pixels here. The other default values should not be changed.

<add key="PortalEnableCallingCard" value="Y" />
<add key="PortalReportAdvancedViewDefault" value="Y" />
<add key="PortalReportEnableCustomCharts" value="Y" />
<add key="PortalReportEnableQuickMassApproval" value="N" />
<add key="PortalReportAllowUserToCreateCustomCharts" value="Y" />
<add key="PortalDefaultWorkflowGraphicalMode" value="HTML5" />
<add key="ProcessesRuntimeWebServiceAllowedUsers" value="wfgen_admin" />

You can copy the ProcessesRunTimeWebServiceAllowedUsers parameter from your existing \wfgen\ws\web.config to \wfgen\web.config.

<add key="EFormAspxPreviousFilesCleanUp" value="Y" />

You can copy this parameter from your existing \wfgen\WfApps\WebApps\eFormASPX\web.config to \wfgen\web.config.

<add key="GetUsersFromDirMaxResultNb" value="100" />

You can copy this parameter from your existing \wfgen\WfApps\WebServices\GetUsersFromDir\web.config to \wfgen\web.config.

<add key="XmlToDatabaseTestMode" value="N" />
<add key="XmlToDatabaseEnableTrace" value="N" />

You can copy these parameters from your existing \wfgen\WfApps\WebServices\XmlToDatabase\web.config to \wfgen\web.config.

<add key="XmlTransPreviousFilesCleanUp" value="Y" />
<add key="XmlTransEnableTrace" value="N" />

You can copy these parameters from your existing \wfgen\WfApps\WebServices\XmlTrans\web.config to \wfgen\web.config.

Remove the following deprecated parameters from <appSettings>:

PortalFollowUpRelevantDataListNumber
PortalPopupRelevantDataListNumber
PortalEnableRequestDataListPopUp

Define the following nodes in <configuration>:

<location path="." inheritInChildApplications="false">
    <system.web>
        <httpRuntime requestValidationMode="2.0" maxRequestLength="10240" />
    </system.web>
</location>
<location path="wfapps/webforms" inheritInChildApplications="false">
    <system.web>
        <httpRuntime requestValidationMode="2.0" maxRequestLength="10240" />
        <pages clientIDMode="AutoID" controlRenderingCompatibilityVersion="3.5" />
    </system.web>
</location>
<location path="ws" inheritInChildApplications="false">
    <system.web>
        <httpRuntime requestValidationMode="2.0" maxRequestLength="10240" />
    </system.web>
</location>

Define or update the following node in <configuration>/<system.web>:

<pages validateRequest="false" enableSessionState="false" />

When upgrading from version 6.0.0 and earlier

Add the following new parameters to <appSettings>:

<add key="AdministrationDefaultWorkflowGraphicalMode" value="HTML5" />
<add key="EngineNotificationLogLevel" value="1" />
<add key="RemoteApprovalLogTraceLevel" value="3" />
<add key="RemoteApprovalMailServerSecurity" value="none" />
<add key="RemoteApprovalRefreshInterval" value="180000" />
<add key="RemoteApprovalMailServerType" value="POP" />
<add key="RemoteApprovalLifeSpan" value="0" />
<add key="RemoteApprovalMailServerPort" value="110" />
<add key="ApplicationSecurityPasswordManagementMode" value="V5" />
<add key="ApplicationSecurityMaxLoginAttempts" value="5" />
<add key="ApplicationSecurityMinimumPasswordLength" value="8" />
<add key="ApplicationSmtpPickupDirectory" value="DRIVE:\inetpub\mailroot\Pickup" />

Replace the ApplicationSmtpPickupDirectory path above with the path of your SMTP gateway pickup folder.

<add key="ApplicationSmtpServerTimeout" value="3000" />
<add key="ApplicationSmtpDeliveryMethod" value="SmtpServer" />

The ApplicationSmtpDeliveryMethod parameter defines the notification delivery method. By default, it uses the SMTP server, but you can change the SMTP delivery method to Pickup directory in the Administration Module Configuration Panel.

When upgrading from version 6.1.0 and earlier

Add the following new parameter to <appSettings>:

<add key="AdministrationAssociatedActivitiesToSwimlane" value="Y" />

When upgrading from version 6.1.4 and earlier

Add or modify the AdministrationFormDataProviderName parameter as follows:

<add key="AdministrationFormDataProviderName" value="System.Data.SqlClient,System.Data.OleDb,System.Data.Odbc,System.Data.OracleClient,Oracle.DataAccess.Client" />

The Oracle.DataAccess.Client value was added to this parameter in version 6.1.5.

When upgrading from version 6.1.6 and earlier

Add the following new parameters to <appSettings>:

<add key="ApplicationWebFormsPath" value="" />
<add key="EngineNotificationDefaultSenderName" value="" />
<add key="PortalDashboardAutoRefreshInterval" value="0" />
<add key="PortalActivityOnCompleteRedirectToView" value="N" />

When upgrading from version 6.4.0 and earlier

Add the following new parameters to <appSettings>:

<add key="SendMessageProvider" value="TWILIO" />
<add key="SendMessageAccountSID" value="" />
<add key="SendMessageAuthToken" value="" />
<add key="SendMessageFrom" value="" />
<add key="SendMessageApiUrl" value="https://api.twilio.com/2010-04-01/Accounts/" />
<add key="SendMessageEnableLogs" value="Y" />

When upgrading from version 6.5.0 and earlier

Add the following new parameter to <appSettings> to configure the SENDHTTPPOST workflow application log file, replacing the value n with 0 to disable logging, 1 for simple logs, or 2 for debug logs:

<add key="SendHttpPostLogLevel" value="n" />

When upgrading from version 6.6.0 and earlier

Remove the following deprecated parameters from <appSettings>:

ApplicationImpersonificationUsername
ApplicationImpersonificationPassword
PortalDefaultWorkflowGraphicalMode
ApplicationEnableFlashDetection

When upgrading from version 7.1.1 and earlier

Add the following new parameters to <appSettings>:

<add key="GraphqlQueryTimeout" value="90000" />
<add key="GraphqlOperationTimeout" value="30000" />
<add key="GraphqlMaxOperationCount" value="10000" />
<add key="GraphqlMaxInputFileSize" value="10240" />
<add key="GraphqlInputFileDownloadTimeout" value="100000" />
<add key="HooksMaxInputFileDownloadTimeout" value="100000" />
<add key="HooksOperationTimeout" value="30000" />
<add key="HooksMaxInputFileSize" value="10240" />
<add key="EngineServiceTempApiFilesLifespan" value="2" />

When upgrading from version 7.3.1 and earlier

Add the following new parameter to <appSettings>:

<add key="AdministrationDefaultConditionLanguage" value="JS" />

When upgrading from version 7.6.0 and earlier

Add the following new parameters to <appSettings>:

<add key="ApplicationSmtpEnableSsl" value="N" />
<add key="ApplicationSmtpPort" value="" />
<add key="ApplicationSmtpUsername" value="" />
<add key="ApplicationSmtpPassword" value="" />

When upgrading from version 7.9.1 and earlier

Add the following new parameters to <appSettings>:

<add key="GraphqlMaxInputFileContentSize" value="0" />
<add key="HooksMaxInputFileContentSize" value="0" />
<add key="GraphqlInputFileAllowedFolders" value="" />
<add key="HooksInputFileAllowedFolders" value="" />

If you're using folders for GraphQL and/or incoming webhooks file operations (such as sending a file action parameter), you must update the values of the GraphqlInputFileAllowedFolders and HooksInputFileAllowedFolders parameters. See the GraphQL Input file allowed folders and Incoming Webhooks Input file allowed folders sections in the WorkflowGen Integration Guide for more information.

When upgrading from version 7.14.3 and earlier

Add the following new parameter to <appSettings>:

<add key="ApplicationSecurityAuthSessionRefreshEnableIFrame" value="Y" />

When upgrading from version 7.14.8 and earlier

Add the following new parameters to <appSettings>:

<add key="EngineServiceInactiveRequestLifespanUnit" value="d" />
<add key="EFormAspxAcceptEmptyInputTextParam" value="Y" />
<add key="SendHttpPostMaxResponseLength" value="4194304" />
<add key="RestApiClientLogLevel" value="0"/>
<add key="RestApiClientRequestTimeout" value="3000" />
<add key="RestApiClientMaxResponseLength" value="4194304" />
<add key="RestApiClientEnableFilesCleanUp" value="Y" />
<add key="GetUsersFromDirLogLevel" value="0" />
<add key="XmlTransEnableFilesCleanUp" value="Y" />
<add key="MergeFormEnableFilesCleanUp" value="Y" />
<add key="GraphqlInputFileAllowedHttpUrls" value="" /> 
<add key="HooksInputFileAllowedHttpUrls" value="" />

If you're using HTTP URLs for GraphQL and/or incoming webhooks file operations (such as sending a file action parameter), you must update the values of the GraphqlInputFileAllowedHttpUrls and HooksInputFileAllowedHttpUrls parameters. See the GraphQL Input file allowed HTTP URLs and Incoming Webhooks Input file allowed HTTP URLs sections in the WorkflowGen Integration Guide for more information.

Remove the following deprecated parameters from <appSettings>:

XmlTransPreviousFilesCleanUp
MergeFormTempFilesLifeSpan

When upgrading from version 7.15.2 and earlier

Add the following nodes after the existing <location> nodes in \wfgen\web.config:

<location path="auth" inheritInChildApplications="false">
    <system.webServer>
        <modules>
            <remove name="ApplicationSecurityAuthenticationModule" />
        </modules>
    </system.webServer>
</location>
<location path="hooks" inheritInChildApplications="false">
    <system.webServer>
        <modules>
            <remove name="ApplicationSecurityAuthenticationModule" />
        </modules>
    </system.webServer>
</location>
<location path="scim" inheritInChildApplications="false">
    <system.webServer>
        <modules>
            <remove name="ApplicationSecurityAuthenticationModule" />
        </modules>
    </system.webServer>
</location>

Remove the node below from \wfgen\auth\web.config, \wfgen\hooks\web.config, and \wfgen\scim\web.config, if present:
```
<modules>
    <remove name="ApplicationSecurityAuthenticationModule" />
</modules>
```

When upgrading from version 7.15.4 and earlier

Add the following new parameter to <appSettings>:

<add key="PortalRedirectAllowedHttpUrls" value="" />

As of version 7.15.5, the optional BACKURL_SUBMIT and BACKURL_CANCEL HTTP parameters used in custom WorkflowGen URLs (for example, when launching a new request and starting the first action within another website) ONLY support absolute URLs (starting with http:// or https://), relative URLs (starting with /), or URLs defined in the PortalRedirectAllowedHttpUrls configuration parameter (e.g. value='blank.htm, myPage.htm').

When upgrading from version 7.15.5 and earlier

Add the following node after the existing <location> nodes in \wfgen\web.config:

<location path="graphql" inheritInChildApplications="false">
   <system.webServer>
      <httpProtocol>
         <customHeaders>
            <add name="Access-Control-Allow-Origin" value="*" />
            <add name="Access-Control-Allow-Methods" value="GET, POST, OPTIONS, HEAD" />
            <add name="Access-Control-Allow-Headers" value="Accept, Origin, Authorization, Content-Type, x-wfgen-impersonate-username, x-iisnode-auth_user" />
         </customHeaders>
      </httpProtocol>
   </system.webServer>
</location>

Change the default value of RestApiClientRequestTimeout from 3000 to 30000 milliseconds.

Make the following modifications to each Node.js component's web.config file (located in \wfgen\graphql, \wfgen\hooks, \wfgen\scim, and \wfgen\auth):

Change the iisnode handler path from server.js to dist/server.js.
Change the rewrite rule url property from server.js to dist/server.js.

It should look as follows:

<handlers>
   <add name="iisnode" path="dist/server.js" verb="*" modules="iisnode"/>
</handlers>

<rewrite>
   <rules>
      <rule name="DynamicContent">
         <conditions>
            <add input="{{REQUEST_FILENAME}}" matchType="IsFile" negate="True"/>
         </conditions>
         <action type="Rewrite" url="dist/server.js"/>
      </rule>
   </rules>
</rewrite>

When upgrading from version 7.16.5 and earlier

Add the following new parameters to <appSettings>:

<add key="AdministrationMaxHelpTextSize" value="10000" />
<add key="ApplicationSecurityAuthAdditionalScopes" value="" />

When upgrading from version 7.18.1 and earlier

Add the following new parameter to <appSettings>:

<add key="ReportsTopProcessesNumber" value="10" />

When upgrading from version 7.18.2 and earlier

Add the following new parameter to <appSettings>:

<add key="ValidationSettings:UnobtrusiveValidationMode" value="None" />

When upgrading from version 7.20.0 and earlier

Add the following new parameters to <appSettings>:

<add key="ApplicationSecurityAuthResponseMode" value="" />
<add key="ApplicationSecurityAuthDecodeAccessToken" value="" />

When upgrading from version 7.21.0 and earlier

Add the following new parameter to <appSettings>:

<add key="ExecSqlLogLevel" value="0" />

As of WorkflowGen 7.22.0, the log level values for the existing GETUSERSFROMDIR, MERGEFORM, SENDHTTPPOST, and RESTAPICLIENT workflow applications have changed to 0 for no logs (default), 2 for information, and 3 for debugging. You can set (or reset) the log levels by updating the values of the following parameters accordingly:

<add key="GetUsersFromDirLogLevel" value="" />
<add key="MergeFormLogLevel" value="" />
<add key="SendHttpPostLogLevel" value="" />
<add key="RestApiClientLogLevel" value="" />

When upgrading from version 7.22.0 and earlier

Remove the existing Access-Control-Allow-* custom header nodes from location path="graphql" (as shown below), since they are deprecated as of version 7.22.1:

<location path="graphql" inheritInChildApplications="false">
    <system.webServer>
        <httpProtocol>
            <customHeaders>
                <add name="Access-Control-Allow-Origin" value="*" />
                <add name="Access-Control-Allow-Methods" value="GET, POST, OPTIONS, HEAD" />
                <add name="Access-Control-Allow-Headers" value="Accept, Origin, Authorization, Content-Type, x-wfgen-impersonate-username, x-iisnode-auth_user" />
            </customHeaders>
        </httpProtocol>
    </system.webServer>
</location>

If you want to configure CORS to allow GraphQL API access from a third-party application, you must now follow the instructions in the Cross-origin resource sharing (CORS) section in the WorkflowGen Integration Guide.

When upgrading from all 7.x.x versions and earlier

Add the following new parameters to <appSettings>:

<add key="AdministrationProcessQuickListSize" value="0" />
<add key="EngineServiceNotificationFrequency" value="60000" />
<add key="EngineServiceCancellationFrequency" value="120000" />
<add key="EngineServiceSynchroActionFrequency" value="15000" />
<add key="EngineServiceScheduledSystemActionFrequency" value="15000" />
<add key="EngineServiceTimeoutSystemActionFrequency" value="15000" />
<add key="EngineServiceCleanupFrequency" value="180000" />
<add key="EngineServiceMaxScheduledSystemActions" value="25" />    
<add key="EngineServiceMaxTimeoutSystemActions" value="25" />
<add key="ApplicationSecurityAuthExposeAccessTokenInCookies" value="N" />
<add key="DocuSignUserGuid" value="" />
<add key="DocuSignAuthServer" value="" />
<add key="DocuSignClientId" value="" />
<add key="DocuSignHostServer" value="" />
<add key="DocuSignSendLogLevel" value="0" />
<add key="DocuSignCheckLogLevel" value="0" />
<add key="JsonToDataLogLevel" value="0" />

Remove the following parameters from <appSettings>:

<add key="DirectoryApplicationAssemblyQualifiedName" value="Advantys.Workflow.Directories.WorkflowDirectoryUserManager, Advantys.Workflow.Directories" />
<add key="DirectoryDeletionRulesAssemblyQualifiedName" value="Advantys.Workflow.Directories.WorkflowDirectoryDeletionRules, Advantys.Workflow.Directories" />
<add key="DirectoryMaxMapToUsers" value="100" />
<add key="DirectoryTruncateValue" value="50" />

Add the following to the <configuration> node:

<runtime>
    <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
        <dependentAssembly>
            <assemblyIdentity name="Newtonsoft.Json" publicKeyToken="30ad4fe6b2a6aeed" culture="neutral" />
            <bindingRedirect oldVersion="0.0.0.0-12.0.0.0" newVersion="12.0.0.0" />
        </dependentAssembly>
    </assemblyBinding>
</runtime>
<system.diagnostics configSource="trace.config" />

Add targetFramework="4.8" to the three web apps' httpRuntime nodes:

<location path="." inheritInChildApplications="false">
    <system.web>
        <httpRuntime requestValidationMode="2.0" maxRequestLength="10240" targetFramework="4.8" />
    </system.web>
</location>
<location path="wfapps/webforms" inheritInChildApplications="false">
    <system.web>
        <httpRuntime requestValidationMode="2.0" maxRequestLength="10240" targetFramework="4.8" />
        <pages clientIDMode="AutoID" controlRenderingCompatibilityVersion="3.5" />
    </system.web>
</location>
<location path="ws" inheritInChildApplications="false">
    <system.web>
        <httpRuntime requestValidationMode="2.0" maxRequestLength="10240" targetFramework="4.8" />
    </system.web>
</location>

Add the following to the <configuration> node in \Inetpub\wwwroot\wfgen\ws\web.config:

<runtime>
    <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
        <dependentAssembly>
            <assemblyIdentity name="Newtonsoft.Json" publicKeyToken="30ad4fe6b2a6aeed" culture="neutral" />
            <bindingRedirect oldVersion="0.0.0.0-12.0.0.0" newVersion="12.0.0.0" />
        </dependentAssembly>
    </assemblyBinding>
</runtime>

Add the following to <configuration> node in \Program Files\Advantys\WorkflowGen\Services\bin\WfgDirectoriesSyncService.exe.config:
```
<system.diagnostics configSource="WfgDirectoriesSyncService.exe.trace.config" />
```

Add the following to the <configuration> node in \Program Files\Advantys\WorkflowGen\Services\bin\WfgWorkflowEngineService.exe.config:

<system.diagnostics configSource="WfgWorkflowEngineService.exe.trace.config" />
<runtime>
    <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
        <dependentAssembly>
            <assemblyIdentity name="Newtonsoft.Json" publicKeyToken="30ad4fe6b2a6aeed" culture="neutral" />
            <bindingRedirect oldVersion="0.0.0.0-12.0.0.0" newVersion="12.0.0.0" />
        </dependentAssembly>
    </assemblyBinding>
</runtime>

Upgrade the WorkflowGen database

Run the SQL scripts listed below in order, starting with your current version of WorkflowGen, then continue running the scripts in the Upgrade the WorkflowGen database section in the main upgrade chapter.

Oracle database is no longer supported as of WorkflowGen 7.16.0.

MS SQL Server

For versions 5.1.9 and earlier

Launch the Update\Databases\MsSQLServer\Update_WFG-V5-2-0.sql database update script in your SQL Server Management Studio tool.

For versions 5.2.x and earlier

Launch the Update\Databases\MsSQLServer\Update_WFG-V5-3-0.sql database update script in your SQL Server Management Studio tool.

For versions 5.3.x, 5.4.0 (alpha, beta 1 and beta 2) and earlier

Launch the Update\Databases\MsSQLServer\Update_WFG-V5-4-0.sql database update script in your SQL Server Management Studio tool.

For versions 5.4.x official and earlier

Launch the Update\Databases\MsSQLServer\Update_WFG-V5-5-0.sql database update script in your SQL Server Management Studio tool.

For versions 5.5.0 and earlier

Launch the Update\Databases\MsSQLServer\Update_WFG-V5-5-1.sqldatabase update script in your SQL Server Management Studio tool.

For versions 5.5.1 and earlier

Launch the Update\Databases\MsSQLServer\Update_WFG-V5-5-2.sql database update script in your SQL Server Management Studio tool.

For versions 5.5.4 and earlier

Launch the Update\Databases\MsSQLServer\Update_WFG-V5-5-5.sql database update script in your SQL Server Management Studio tool.

For versions 5.5.5 and earlier

Launch the Update\Databases\MsSQLServer\Update_WFG-V5-6-0.sql database update script in your SQL Server Management Studio tool.

For versions 5.6.1 and earlier

Launch the Update\Databases\MsSQLServer\Update_WFG-V5-6-2.sql database update script in your SQL Server Management Studio tool.

For versions 5.6.2 and earlier

Launch the Update\Databases\MsSQLServer\Update_WFG-V5-6-3.sql database update script in your SQL Server Management Studio tool.

For versions 5.6.3 and earlier

Launch the Update\Databases\MsSQLServer\Update_WFG-V5-6-4.sql database update script in your SQL Server Management Studio tool.

For versions 5.7.0 and earlier

Launch the Update\Databases\MsSQLServer\Update_WFG-V5-7-1.sql database update script in your SQL Server Management Studio tool.

For versions 5.7.1 and earlier

Launch the Update\Databases\MsSQLServer\Update_WFG-V5-7-2.sql database update script in your SQL Server Management Studio tool.

For versions 5.7.4 and earlier

Launch the Update\Databases\MsSQLServer\Update_WFG-V6-0-0.sql database update script in your SQL Server Management Studio tool.

For versions 6.0.0 and earlier

Launch the Update\Databases\MsSQLServer\Update_WFG-V6-1-0.sql database update script in your SQL Server Management Studio tool.

For versions 6.1.2 and earlier

Launch the Update\Databases\MsSQLServer\Update_WFG-V6-1-3.sql database update script in your SQL Server Management Studio tool.

For versions 6.1.3 and earlier

Launch the Update\Databases\MsSQLServer\Update_WFG-V6-1-4.sql database update script in your SQL Server Management Studio tool.

For versions 6.1.6 and earlier

Launch the Update\Databases\MsSQLServer\Update_WFG-V6-2-0.sql database update script in your SQL Server Management Studio tool.

For versions 6.4.0 and earlier

Launch the Update\Databases\MsSQLServer\Update_WFG-V6-5-0.sql database update script in your SQL Server Management Studio tool.

For versions 6.5.0 and earlier

Launch the Update\Databases\MsSQLServer\Update_WFG-V6-6-0.sql database update script in your SQL Server Management Studio tool.

For versions 6.6.0 and earlier

Launch the Update\Databases\MsSQLServer\Update_WFG-V7-0-0.sql database update script in your SQL Server Management Studio tool.

For versions 7.1.0 and earlier

Launch the Update\Databases\MsSQLServer\Update_WFG-V7-1-1.sql database update script in your SQL Server Management Studio tool.

For versions 7.1.1 and earlier

Launch the Update\Databases\MsSQLServer\Update_WFG-V7-2-0.sql database update script in your SQL Server Management Studio tool.

For versions 7.2.1 and earlier

Launch the Update\Databases\MsSQLServer\Update_WFG-V7-3-0.sql database update script in your SQL Server Management Studio tool.

For versions 7.5.1 and earlier

Launch the Update\Databases\MsSQLServer\Update_WFG-V7-6-0.sql database update script in your SQL Server Management Studio tool.

For versions 7.9.1 and earlier

Launch the Update\Databases\MsSQLServer\Update_WFG-V7-10-0.sql database update script in your SQL Server Management Studio tool.

For versions 7.10.0 and earlier

Launch the Update\Databases\MsSQLServer\Update_WFG-V7-11-0.sql database update script in your SQL Server Management Studio tool.

For versions 7.11.2 and earlier

Launch the Update\Databases\MsSQLServer\Update_WFG-V7-12-0.sql database update script in your SQL Server Management Studio tool.

For versions 7.12.2 and earlier

Launch the Update\Databases\MsSQLServer\Update_WFG-V7-13-0.sql database update script in your SQL Server Management Studio tool.

For versions 7.13.1 and earlier

Launch the Update\Databases\MsSQLServer\Update_WFG-V7-14-0.sql database update script in your SQL Server Management Studio tool.

For versions 7.14.7 and earlier

Launch the Update\Databases\MsSQLServer\Update_WFG-V7-15-0.sql database update script in your SQL Server Management Studio tool.

For versions 7.15.1 and earlier

Launch the Update\Databases\MsSQLServer\Update_WFG-V7-15-2.sql database update script in your SQL Server Management Studio tool.

For versions 7.15.5 and earlier

Launch the Update\Databases\MsSQLServer\Update_WFG-V7-16-0.sql database update script in your SQL Server Management Studio tool.

For versions 7.16.5 and earlier

Launch the Update\Databases\MsSQLServer\Update_WFG-V7-17-0.sql database update script in your SQL Server Management Studio tool.

For versions 7.21.0 and earlier

Launch the Update\Databases\MsSQLServer\Update_WFG-V7-22-0.sql database update script in your SQL Server Management Studio tool.

For all 7.x.x and earlier versions

Launch the Update\Databases\MsSQLServer\Update_WFG-V8-0-0.sql database update script in your SQL Server Management Studio tool.

Update the Directory Synchronization configuration file

A new configuration parameter is required when upgrading from version 5.1.5 and earlier. This parameter allows you to provide a unique service name to the WorkflowGen Directory Synchronization service should you have multiple instances of WorkflowGen installed on a single server.

Add the following parameter to DRIVE:\Program Files\Advantys\WorkflowGen\Services\bin\WfgDirectoriesSyncService.exe.config:

<add key="ServiceName" value="WorkflowGenDirSyncService" />

Update the WorkflowGen Engine Service configuration file

A new configuration parameter is required when upgrading from version 5.1.5 or earlier. This parameter allows you to provide a unique service name to the WorkflowGen Engine service should you have multiple instances of WorkflowGen installed on a single server.

Add the following parameter to DRIVE:\Program Files\Advantys\WorkflowGen\Services\bin\WfgWorkflowEngineService.exe.config:

<add key="ServiceName" value="WorkflowGenEngineService" />

Update the GraphQL and webhooks configuration files

In the \wfgen\graphql\web.config and \wfgen\hooks\web.config files, add the following to <system.webServer>:

<httpErrors existingResponse="PassThrough" errorMode="Detailed"></httpErrors>

Move the XMLTODATABASE transactions file

If you're upgrading from version 5.7.4 or earlier, copy the Transactions.xml file from \wfgen\WfApps\WebServices\XmlToDatabase\App_Data to \wfgen\App_Data\Files\XmlToDatabase.

PreviousUpgrade NextOptional

Last updated 17 days ago